CTS 5.5 MIS Minimally Invasive posterior pedicle screw System
CTS 5.5 MIS Minimally Invasive Posterior spine fixation system is intended to immobilize and stabilize certain sections of the spine in patients with mature skeletal system. Therefore, it could be used in cases of acute and chronic instabilities or deformities of the thoracic, lumbar and sacral spine as well as a supplement to vertebral fusions.
Minimally invasive screw-rod system is an effective surgical equipment in the treatment of various spinal disorders caused by trauma or tumors as well as congenital or acquired deformities and degenerations. It is generally composed of different type of spine screws, rods and set screws.
Spine screws
-
Available in monoaxial, uniplanar and polyaxial type
-
Available diameter sizes of 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7.0 mm, and 7.5 mm.
-
Cancellous and cortical bone thread design and built-in threaded reduction (15 mm) for easy rod approximation
-
Integrated break-off reduction tabs (length: 70 mm) eliminate the need for extension assembly
-
Optimized screw tip: self-tapping and self-centering tip allows for insertion with or without tapping
-
Cannulation and K-wire provide accurate placement of the spine screw
-
Fenestrated Screw System provides enhanced fixation in both the pedicle and vertebral body
-
Three bone cement holes
Set screw
-
Available in normal and break-off version
-
Available in one size (ø 9 mm)
-
Suitable for all type of spine screws
Rods
-
Available in straight and curved version
-
Each version is available with 5.5 mm diameter and in different lengths
-
Can be easily contoured to follow the patient’s anatomy
CTS 5.5 Posterior pedicle screw system
The Mediox CTS 5.5 Spine System is intended to provide immobilization and stabilization of spinal segments in skeletally mature patients as an adjunct to fusion in the treatment of acute and chronic instabilities or deformities of the thoracic, lumbar and sacral spine.​
The CTS 5.5 Spine System consists of variety of shapes and sizes of rods, hooks, screws, staples and connecting components which can be rigidly locked into variety of configurations, with each construct being tailor made for the individual case.
Characteristic​
-
Low-profile head design
-
Axe-opening thread design on the locking screw and head
-
Clamping insert ensures a more stable fixation between the rod and the screw head
-
Cancellous and cortical thread design for proper fixation
-
Two-section thread for faster screw insertion
-
Self-tapping screw-end design for faster and more accurate insertion
-
Break-off head design also available for larger reductions
-
Grey-anodised titanium coating
-
Extendibility to cervico-thoracic region (with ø 5.5/ø 3.5 mm transition diameter rod)
-
Raw material: medical grade titanium alloy (Ti 6Al 4V ELI), which complies with the ISO 5832-3 standard
CAP Anterior cervical plate system
Mediox CAP anterior cervical plate system is indicated for stabilization of the cervical spine from C2 to C7 employing unicortical screw fixation at the anterior face of the vertebral bodies.
The application of an anterior cervical plate has become widely accepted when anterior spinal fusion is performed to stabilize the spine for tumor, trauma, deformity, degenerative disc disease and other forms of cervical instability. The addition of anterior plate fixation offers many benefits such as: resistance to graft displacement, a reduced incidence of pseudarthrosis related to micromotion at the graft-vertebral body interface, maintaining anterior cervical alignment when multi-level discectomies or corpectomies are performed, and a decreased reliance on prolonged external bracing.
Characteristic
-
A range of plate sizes to fit different anatomies:
D=4 holes - for fixing 1 vertebral segment (2 adjacent vertebrae)
D=6 holes – for fixing 2 vertebral segment
D=8 holes – for fixing 3 vertebral segment
D=10 holes – for fixing 4 vertebral segment
-
Easy locking mechanism
-
Fixed and Polaxial (±9°) angularly stable screw fixing design
-
Self-tapping and Self-drilling screws
-
Temporary fixation with pins
-
Holes in the plate allow visual control of the intervertebral disc
-
2mm plate thickness and low profile design to avoid irritation of esophageal tissue
-
Raw material: medical grade titanium alloy (Ti 6Al 4V ELI), which complies with the ISO 5832-3 standard
MSC-C Cervical cage
MSC-AC Stand-alone cervical cage
MSC-C cage is intended to replace cervical intervertebral discs and to fuse adjacent vertebral bodies at vertebral levels C2–C7 following anterior cervical discectomy. The MSC-C spacer is intended for use with supplemental fixation.
The MSC-C cage system has two types: Type 1 cage which incorporates two lateral titanium alloy spikes and Type 2 without spikes.
The Mediox MSC-AC implant system consists of a stand-alone interbody fusion device with internal screw fixation, which are intended to replace cervical intervertebral discs and to fuse adjacent vertebral bodies at vertebral levels C2 – C7 following anterior cervical discectomy for reduction and stabilization of the cervical spine. The system is comprised of an intervertebral cage (spacer) and bone screws.
MSC-T TLIF cage
Mediox MSC-T cage is intended to replace lumbar and lumbosacral intervertebral discs and to fuse the adjacent vertebral bodies together at vertebral levels L1–S1. The Mediox MSC-T cage is designed for unilateral transforaminal approach (TLIF). The use of autogenous bone or bone graft substitute as well as supplemental fixation is always recommended.
MSC-P PLIF cage
Mediox MSC-P cage is intended to replace lumbar and lumbosacral intervertebral discs and to fuse the adjacent vertebral bodies together at vertebral levels L1–S1. The Mediox MSC-P cage is designed for unilateral transforaminal approach (TLIF) or optionally for a bilateral posterior approach (PLIF). The use of autogenous bone or bone graft substitute as well as supplemental fixation is always recommended.